ディーゼル機関車(DL) EMD E8 A Rock Island #652 DCCサウンド

旅客用ＤＬ　EMD E8A ロックアイランド仕様です。DCCサウンド搭載機です。在庫が少なくなっております。お早目のご注文をお勧め致します。

お取り寄せ商品になります。
ご注文をいただいてから商品のチェック、発送まで３週間程度かかります。
都合によりお取り寄せが不可能な場合もありますのでご了承ください。

メーカ：ブロードウェイリミテッド
スケール：N 1/160
電源：DC/DCC

The E8 was a 2,250-horsepower, A1A-A1A passenger-train locomotive built by General Motors' Electro-Motive Division (EMD) of La Grange, Illinois. 450 cab versions, or E8As, were built from August 1949 to January 1954, 447 for the U.S. and 3 for Canada. 46 E8Bs were built from December 1949 to January 1954, all for the U.S. The 2,250hp came from two 12 cylinder model 567B engines, each driving a generator to power the two traction motors on one truck. The E8 was the ninth model in the line of passenger diesels of similar design known as EMD E-units. Starting in September 1953 at total of 21 E8As were built which used either the 567BC or 567C engines.

In profile, the front of the nose of E7, E8, and E9 units is less slanted than earlier EMD units, and E7/8/9s (and their four axle cousins, the F-unit series) have been nicknamed "bulldog nose" units. Earlier E-unit locomotives were nicknamed "slant nose" units. After passenger trains were canceled on the Erie Lackawanna in 1970, the E8s were re-geared for freight and were very reliable for the EL. These units were on freight trains until the early years of Consolidated Railroad Corporation ("Conrail").

Units noted with the designation E8m were rebuilt using components from earlier EMC/EMD locomotives. Externally the units look just like E8s. The difference in horsepower produced in these E8m units is because the older generators are reused.

Features
ABS plastic body with heavy die cast chassis for maximum tractive effort
Precision gearing
5-pole can motor with skew wound armature and dual fly wheels
Locomotive Length (coupler to coupler): 5.5"
Locomotive Weight: 4 oz
Many separately applied details such as handrails, ladders, whistle
Will Operate on Codes 80, 70, 60, and 55 rail
Recommended Minimum Radius: 9.75"

Industry-Leading Features:
All new Paragon2 sound and control system
Integral DC/DCC dual mode decoder for ease of operation
Industry best slow-speed operation in DC and DCC
Prototypical light operation with headlight
Authentic EMD E8 sounds! Controllable in DC and DCC
All-wheel drive and all-wheel electrical pick-up
Operating knuckle couplers
Near brass-caliber detail at a plastic price